Veneered Boards

Our veneered boards stand out because of the diversity in workmanship and application. RoHol transforms various substrates into designer veneer objects; clearly evidencing our strengths and individuality.

 

Particle Board

Particle boards, also referred to as chipboard (P2 - P7; previously FPY), are the largest and the best-known sub-group of wooden board material. They are manufactured from different-sized wood chips which are bound together and then pressed into multi-layer boards, comprising between three and five sheets. The outer-layer is almost always made from much finer chips, especially when a face veneer will be added for decorative purposes (e.g. for furniture).

SPECIAL FEATURES:
Additional thicknesses: Available from 9 - 50 mm.
Special features: Also available with Class 1 (IF20) and Class 2 (A100) bonding.
Total thickness: 9-50 mm.

Veneers
 

Sizes:
2.800 x 2.060 mm
2.560 x 1,850 mm
2.490 x 1.240 mm

MDF-Boards

Medium-density fibreboard, or MDF- Board for short, is an engineered wood product. It is created by gently compressing finely crushed, mainly bark-free, coniferous wood fibres. The result of this process is a wood product which is consistently homogeneous in both its length and width.

SPECIAL FEATURES:Also available with V313, IF20 and A100 bonding;
additional thicknesses available: 9 - 39 mm.

Veneers
 

Sizes:
2.800 x 2.060 mm
2.430 x 1.210 mm

Fireproof Boards

Our range of fireproof boards includes both gypsum boards and cement boards A1 (cement-bonded particle boards).

SPECIAL FEATURES:
IF20 Bonding;
additional thicknesses available for gypsum boards; 13 - 23 mm

Veneers
 

Sizes:
2.990 x 1.240 mm
3.030 x 1.250 mm

Thin chipboard/ hardboard

Thin chipboards are extra-thin, fine particle boards; they are perfect for use as lightweight boards. A hardboard, or high-density fibreboard has a density of over 800kg/m3 (50 lbs per cubic foot) and a thickness of up to 8 mm.

SPECIAL FEATURES:
Bonding: IF20;
additional thicknessnes available: 4-8 mm.

Veneers
 

Sizes:
2.800 x 2.100 mm
2.800 x 2.060 mm

Blockboards

Blockboard is a wood based panel, made up of a core of softwood strips that are placed edge to edge, sandwiched between face or backing veneers, and then bonded together under high-pressure (technical standard DIN 68705-2). Even when exposed to fluctuating climatic effects, Blockboards remain stable in their form, bend-proof and highly-durable. They are also very light and have an average density of 450kg/m3 (28lbs/ft3). The density varies according to the wood type.

SPECIAL FEATURES:
Strengthen with rotary-cut backing veneer: 13 - 50 mm
Strengthen with chipblock/softwood backing veneer: 17 - 39 mm
Strengthen with MDF backing veneer: 16 - 39 mm
Strengthen with softwood middle strips: 17 - 39 mm
Bonding: IF 20

Veneers
 

Sizes:
2.500 x 1.250 mm
2.590 x 2.040 mm
2.800 x 2.060 mm

Birch Plywood Boards

Birch plywood possesses first-class sturdiness and rigidity and therefore has excellent long-term creep resistance. This particular substrate, that we produce here at RoHol, is also highly weather-resistant and moisture-resistant.

SPECIAL FEATURES:
Substrate AW100;
Veneer IF20;
additional thicknessess available 6,5 - 50 mm.

Veneers
 

Sizes:
2.500 x 1.250 mm
3.000 x 1.500 mm

Additional substrates

Our strength lies in the unlimited composition of veneered boards. The above-mentioned materials merely represent our standard program. For further ideas, desires and inspirations, feel free to contact our team, who will be ready to assist you
- The Austrian Wood Composer!

 
Custom-made for you!